SN74LVC2G34DBVR

• Dual (2-channel) Non-Inverting Buffer/driver, One Input and One Output per Channel
• Wide 1.65 V to 5.5 V Supply Range for Mixed-Voltage Logic Interfacing
• 32 mA High-Level and Low-Level Output Drive Current
• 3.2 Ns Propagation delay; 10 uA Quiescent Current
• 6-Pin SOT-23 Surface-Mount package, 2.9 Mm X 1.6 Mm
• -40 C to +125 C Operating range; Lead free, RoHS compliant, No REACH SVHC; Tape and Reel

The SN74LVC2G34DBVR is a Texas Instruments dual non-inverting buffer/driver in a 6-pin SOT-23 package. It contains two independent channels, each with one input and one output, and operates across a 1.65 V to 5.5 V supply range, which allows it to serve as a level-tolerant buffer between mixed-voltage logic sections. TI rates the SN74LVC2G34DBVR at plus/minus 32 mA output drive with a 3.2 ns propagation delay and 10 uA quiescent current. The device measures 2.9 mm x 1.6 mm, is lead free and RoHS compliant, and is rated for -40 C to +125 C operation.

Non-inverting buffers are used to restore signal edges, isolate loads and increase fanout when a driver cannot supply enough current for the nets it feeds. With 32 mA of drive and a 1.65 V to 5.5 V range, the SN74LVC2G34DBVR is commonly placed between a low-voltage microcontroller or FPGA I/O and a heavier load such as a long trace, LED, gate driver input or a bus running at a different rail voltage. The 6-pin SOT-23 outline lets designers add buffering locally at the point of use rather than routing back to a larger logic device. Its -40 C to +125 C rating suits automotive, industrial and telecom boards as well as general consumer and computing designs.