SN74LVC1G17DCKR

• Single Non-Inverting Buffer with Schmitt-Trigger Inputs
• Wide 1.65 V to 5.5 V Supply Range
• 32 mA Output Drive at Both High and Low Levels
• 5 Ns Propagation delay, 1.5 uA Quiescent Current
• 5-Pin SC70 package, 2 Mm X 1.25 mm, 1.1 Mm Height
• -40 C to 125 C Operating range, MSL 1
• RoHS compliant, Lead free, Active status, 3000 per Reel

The Texas Instruments SN74LVC1G17DCKR is a single non-inverting buffer with Schmitt-trigger inputs, operating across a 1.65 V to 5.5 V supply range in a 5-pin SC70 package. It drives 32 mA at both high and low output levels, with a 5 ns propagation delay, 1.5 uA quiescent current and 500 nA nominal supply current. The SN74LVC1G17DCKR is rated -40 C to 125 C, is MSL 1, RoHS compliant, lead free with gold contact plating, at Active lifecycle status, and ships on tape and reel in quantities of 3000. A Schmitt-trigger input applies hysteresis between its rising and falling switching thresholds, so it cleans up slow or noisy edges into a sharp logic transition.

The SN74LVC1G17DCKR is used to condition a slow, noisy or long-cabled signal into a clean logic edge, and to add drive strength where a source cannot fault out a bus. Common placements are debouncing mechanical switches, squaring up RC-delayed power-on reset and slow clock edges, buffering sensor and optocoupler outputs, and isolating a weak driver from a capacitive load. The single-gate SC70 package is designed to be dropped in near the point of need late in a layout rather than routed back to a larger logic device. Buyers are embedded and consumer designers across nearly every segment, plus contract manufacturers stocking single-gate logic as a standard line item.