
TS3USB221DRCR
High-Speed USB 2.0 (480 Mbps) 1: 2 Multiplexer/Demultiplexer Switch With Single Enable 10-VSON -40 to 85
Fusion-Tested. Quality Guaranteed.
Combining advanced technology and proprietary data with expert engineering and quality teams to maintain consistent testing standards across all facilities.
Full Specifications
- High Level Output Current
- 64mA
- Operating Supply Voltage
- 3V
- Lifecycle Status
- Production
- Number of Pins
- 10
- Packaging
- Tape & Reel
- Number of Inputs
- 4
- Number of Outputs
- 2
- Bandwidth
- 1.1GHz
- Number of Channels
- 2
- Number of Circuits
- 1
- Min Supply Voltage
- 2.3V
- Max Supply Voltage
- 3.6V
- Min Operating Temperature
- -40°C
- Max Operating Temperature
- 85°C
- Operating Supply Current
- 30µA
- RoHS
- Compliant
- Contact Plating
- Gold
- Height
- 1mm
- Lead Free
- Lead Free
- Length
- 3mm
- Manufacturer Lifecycle Status
- Production
- Nominal Supply Current
- 30µA
- Radiation Hardening
- No
- REACH SVHC
- No
- Resistance
- 6O
- Schedule B
- 8542390000
- Supply Type
- Single
- Termination
- SMD/SMT
- Throw Configuration
- DPST
- Turn-Off Delay Time
- 12ns
- Turn-On Delay Time
- 30ns
- Weight
- 26.109911mg
- Width
- 3mm
Key Features
- 1:2 Multiplexer/Demultiplexer for High-Speed USB 2.0 Up to 480 Mbps
- 1.1 GHz Bandwidth with Approximately 6 Ω on-Resistance
- Two Switched channels, Four inputs, Two Outputs
- Single Enable Control Input
- 2.3 V to 3.6 V Single supply, Approximately 30 µA Supply Current
- 10-Pin VSON package, -40°C to 85°C, RoHS Compliant Tape and Reel
About this Product
The Texas Instruments TS3USB221DRCR is a 1:2 multiplexer and demultiplexer switch for High-Speed USB 2.0 signaling at up to 480 Mbps, with a single enable input, in a 10-pin VSON package. It provides 1.1 GHz of bandwidth and roughly 6 Ω of on-resistance across two switched channels, and runs from a 2.3 V to 3.6 V single supply at about 30 µA. The TS3USB221DRCR operates from -40°C to 85°C and ships on tape and reel.
Common Uses
What is the Texas Instruments TS3USB221DRCR High-Speed USB 2.0 1:2 Multiplexer/Demultiplexer Switch Used For?
A USB 2.0 differential mux is used when one USB controller port has to be shared between two physical connectors or two internal endpoints, or when a single connector must be steered between a host controller and a device controller. Because USB high-speed signaling is impedance sensitive, a purpose-built switch with wide bandwidth and low on-resistance is used instead of a general-purpose analog switch to keep eye diagrams and return loss within specification. Typical designs include docking stations, port-sharing on notebooks and tablets, test and programming fixtures, set-top boxes, and industrial equipment that exposes both a service port and an operational port. Buyers are consumer, computing peripheral, and industrial OEMs and their contract manufacturers.
Certifications & Memberships
Fusion’s in-house quality hubs and Prosemi testing facility are fully certified to meet critical industry standards for electronic component inspection and testing.
Fusion-Tested. Quality Guaranteed.
Combining advanced technology and proprietary data with expert engineering and quality teams to maintain consistent testing standards across all facilities.