
DFE252012P-1R0M=P2
Inductor Power Shielded Wirewound 1uH 20% 1MHz Metal 3.2A 0.042Ohm DCR 1008 T/R
Fusion-Tested. Quality Guaranteed.
Combining advanced technology and proprietary data with expert engineering and quality teams to maintain consistent testing standards across all facilities.
Full Specifications
- Mount
- Surface Mount
- Case/Package
- 1008
- Current Rating
- 3.2A
- Saturation Current
- 4.3A
- DC Resistance (DCR)
- 42mO
- Inductance
- 1µH
- Lifecycle Status
- Production
- Tolerance
- 20%
- Shielding
- Shielded
- Core Material
- Ferrite
- Test Frequency
- 1MHz
- Min Operating Temperature
- -40°C
- Max Operating Temperature
- 125°C
- RoHS
- Compliant
- Case Code (Imperial)
- 1008
- Case Code (Metric)
- 2520
- Composition
- Wirewound
- Depth
- 2mm
- Height
- 1.2mm
- Height - Seated (Max)
- 990.6µm
- Inductance Tolerance
- 20%
- Length
- 2.4892mm
- Manufacturer Lifecycle Status
- Production
- Max DC Current
- 3.2A
- RMS Current (Irms)
- 3.2A
- Schedule B
- 8504500000
- Series Resistance
- 42mO
- Width
- 2.0066mm
Key Features
- 1µH Inductance With 20% Tolerance
- 3.2A Rated Current
- 4.3A Saturation Current
- Low 42mΩ DC Resistance
- Shielded Wirewound Construction
- 1008 (2520 Metric) Surface Mount Case
About this Product
The Murata DFE252012P-1R0M=P2 is a shielded wirewound power inductor with 1µH inductance and 20% tolerance, measured at 1M Hz. It is rated for 3.2A current with a 4.3A saturation current and 42mΩ DC resistance. The inductor comes in a 1008 (2520 metric) surface mount case, operates from -40°C to 125°C and is RoHS compliant.
Common Uses
What is the Murata DFE252012P-1R0M=P2 1µH Shielded Power Inductor Used For?
The DFE252012P-1R0M=P2 is used as the energy-storage inductor in compact DC-DC buck and boost converters and point-of-load regulators. Its multi-amp current rating and shielded construction suit power rails for processors, memory and peripherals in smartphones, tablets, notebooks, wearables and networking equipment. Power designers use it where high current is needed in a small footprint.
Certifications & Memberships
Fusion’s in-house quality hubs and Prosemi testing facility are fully certified to meet critical industry standards for electronic component inspection and testing.
Fusion-Tested. Quality Guaranteed.
Combining advanced technology and proprietary data with expert engineering and quality teams to maintain consistent testing standards across all facilities.