RC0402FR-075R11L

• 5.11 Ohm Resistance with a Tight 1% Tolerance
• 200ppm per Degree C Temperature Coefficient
• 62.5mW Power Rating with 63mW Maximum Dissipation and a 50V Rating
• Thick Film Composition on a Two-Termination 0402 imperial, 1005 Metric Case
• 1mm by 508um Footprint with 400um height, SMD/SMT Termination
• -55 to 155 Degrees C Operating range, Tape and reel, Lead Free and RoHS Compliant

The Yageo RC0402FR-075R11L is a 5.11 ohm thick film chip resistor with a 1% tolerance and a 200ppm per degree C temperature coefficient. It is rated at 62.5mW power, with a maximum power dissipation of 63mW and a 50V voltage rating. The RC0402FR-075R11L uses a two-termination 0402 imperial case, 1005 in metric, measuring 1mm by 508um with a 400um height and SMD/SMT termination. Yageo supplies the part on tape and reel with a -55 to 155 degrees C operating range, lead free and RoHS compliant.

Low-value precision resistors in the single-digit ohm range are used for current sensing, LED and laser-diode ballasting, series damping on high-speed signal lines, and inrush or gate-drive limiting, and the RC0402FR-075R11L covers those roles at 1% tolerance in a 0402 footprint. Thick film construction is the volume-manufacturing standard for general-purpose chip resistors, and the 200ppm per degree C coefficient is adequate wherever the resistor sets a limit rather than a precision ratio. The 0402 case suits dense consumer, computing, networking and industrial boards, while the 155 degrees C maximum operating temperature extends its use into hotter enclosures. Buyers are contract manufacturers and OEMs across consumer, automotive and industrial segments, typically purchasing in full reel quantities.